8. Lowlevel interface¶
FORCESPRO supports designing solvers and controllers via MATLAB and Python scripts. When using the MATLAB client, a Simulink block is always created such that you can plug your advanced formulation directly into your simulation models, or download it to a realtime target platform.
The lowlevel interface gives advanced optimization users the full flexibility when designing custom optimization solvers and MPC controllers based on nonstandard formulations.
This interface is provided with all variants of FORCESPRO, starting with Variant S.
8.1. Supported problem class¶
The FORCESPRO lowlevel interface supports the class of convex multistage quadratically constrained programs (QCQPs) of the form
for \(i=1,...,N\) and \(k=1,...,M\). To obtain a solver for this optimization program using the FORCESPRO client, you need to define all data in the problem, that is the matrices \(H_i\), \(A_i\), \(Q_{i,j}\), \(D_i\), \(C_i\) and the vectors \(\underline{z}_i\), \(\bar{z}_i\), \(b_i\), \(L_{i,k}\), \(r_{i,k}\), \(c_i\), in a MATLAB struct or Python dictionary, along with the corresponding dimensions. The following steps will take you through this process. Importantly, the matrices \(H_i\) and \(Q_{i,j}\) should all be positive definite.
Note
FORCESPRO supports all problem data to be parametric, i.e. to be unknown at code generation time. Read Section 12 to learn how to use parameters correctly.
In the following, we describe how to model a problem of the above form with FORCESPRO. First make sure that the FORCESPRO client is on the MATLAB/Python path. See Section 3 for more details on how to set up the MATLAB client and Section 3.3.
After the PYTHONPATH has been appropriately set up to include your FORCESPRO client directory (see Section 3.3.3), Python users have to import the FORCESPRO module:
import forcespro
8.2. Multistage struct¶
First, an empty struct/class has to be initialized, which contains all fields needed and initialises matrices and vectors to empty matrices. The command
stages = MultistageProblem(N);
stages = forcespro.MultistagePoblem(N)
creates such an empty structure/class of length \(N\). Once this structure/class has been created, the corresponding matrices, vectors and dimensions can be set for each element of stages.
8.3. Dimensions¶
In order to define the dimensions of the stage variables \(z_i\), the number of lower and upper bounds, the number of polytopic inequality constraints and the number of quadratic constraints use the following fields:
stages(i).dims.n = ...; % length of stage variable zi
stages(i).dims.r = ...; % number of equality constraints
stages(i).dims.l = ...; % number of lower bounds
stages(i).dims.u = ...; % number of upper bounds
stages(i).dims.p = ...; % number of polytopic constraints
stages(i).dims.q = ...; % number of quadratic constraints
stages.dims[ i ]['n'] = ... # length of stage variable zi
stages.dims[ i ]['r'] = ... # number of equality constraints
stages.dims[ i ]['l'] = ... # number of lower bounds
stages.dims[ i ]['u'] = ... # number of upper bounds
stages.dims[ i ]['p'] = ... # number of polytopic constraints
stages.dims[ i ]['q'] = ... # number of quadratic constraints
8.4. Cost function¶
The cost function is, for each stage, defined by the matrix \(H_i\) and the vector \(f_i\). These can be set by
stages(i).cost.H = ...; % Hessian
stages(i).cost.f = ...; % linear term
stages.cost[i]['H'] = ... # Hessian
stages.cost[i]['f'] = ... # linear term
Note: whenever one of these terms is zero, you have to set them to zero (otherwise the default of an empty matrix is assumed, which is different from a zero matrix).
8.5. Equality constraints¶
The equality constraints for each stage, which are given by the matrices \(C_i\), \(D_i\) and the vector \(c_i\), have to be provided in the following form:
stages(i).eq.C = ...;
stages(i).eq.c = ...;
stages(i).eq.D = ...;
stages.eq[ i ]['C'] = ...
stages.eq[ i ]['c'] = ...
stages.eq[ i ]['D'] = ...
8.6. Lower and upper bounds¶
Lower and upper bounds have to be set in sparse format, i.e. an index vector lbIdx/ubIdx that defines the elements of the stage variable \(z_i\) has to be provided, along with the corresponding upper/lower bound lb/ub:
stages(i).ineq.b.lbidx = ...; % index vector for lower bounds
stages(i).ineq.b.lb = ...; % lower bounds
stages(i).ineq.b.ubidx = ...; % index vector for upper bounds
stages(i).ineq.b.ub = ...; % upper bounds
stages.ineq[ i ]['b']['lbidx'] = ... # index vector for lower bounds
stages.ineq[ i ]['b']['lb'] = ... # lower bounds
stages.ineq[ i ]['b']['ubidx'] = ... # index vector for upper bounds
stages.ineq[ i ]['b']['ub'] = ... # upper bounds
Both lb and lbIdx must have length stages(i).dims.l / stages.dims[ i ][‘l’], and both ub and ubIdx must have length stages(i).dims.u / stages.dims[ i ][‘u’].
8.7. Polytopic constraints¶
In order to define the inequality \(A_iz_i\leq b_i\), use
stages(i).ineq.p.A = ...; % Jacobian of linear inequality
stages(i).ineq.p.b = ...; % RHS of linear inequality
stages.ineq[ i ]['p']['A'] = ... # Jacobian of linear inequality
stages.ineq[ i ]['p']['b'] = ... # RHS of linear inequality
The matrix A must have stages(i).dims.p / stages.dims[ i ][‘p’] rows and stages(i).dims.n / stages.dims[ i ][‘n’] columns. The vector b must have stages(i).dims.p / stages.dims[ i ][‘p’] rows.
8.8. Quadratic constraints¶
Similar to lower and upper bounds, quadratic constraints are given in sparse form by means of an index vector, which determines on which variables the corresponding quadratic constraint acts.
stages(i).ineq.q.idx = { idx1, idx2, …}; % index vectors
stages(i).ineq.q.Q = { Q1, Q2, …}; % Hessians
stages(i).ineq.q.l = { L1, L2, …}; % linear terms
stages(i).ineq.q.r = [ r1; r2; … ]; % RHSs
stages.ineq[ i ]['q']['idx'] = ... # index vectors
stages.ineq[ i ]['q']['Q'] = ... # Hessians
stages.ineq[ i ]['q']['l'] = ... # linear terms
stages.ineq[ i ]['q']['r'] = ... # RHSs
If the index vector idx1 has length \(m_1\), then the matrix Q must be square and of size \(m_1\times m_1\), the column vector l1 must be of size \(m_1\) and \(r_1\) is a scalar. Of course this dimension rules apply to all further quadratic constraints that might be present. Note that \(L_1\), \(L_2\) etc. are column vectors in MATLAB!
Since multiple quadratic constraints can be present per stage, in MATLAB we make use of the cell notation for the Hessian, linear terms, and index vectors. In Python we make use of Python object arrays for the Hessians, linear terms, and index vectors.
8.8.1. Example¶
To express the two quadratic constraints
on the third stage variable, use the code
stages(3).ineq.q.idx = { [3 5], [1] } % index vectors
stages(3).ineq.q.Q = { [1 0; 0 2], [5] }; % Hessians
stages(3).ineq.q.l = { [0; 1], [0] }; % linear terms
stages(3).ineq.q.r = [ 3; 1 ]; % RHSs
stages.ineq[31]['q']['idx'] = np.zeros((2,), dtype=object) # index vectors
stages.ineq[31]['q']['idx'][0] = np.array([3,5])
stages.ineq[31]['q']['idx'][1] = np.array([1])
stages.ineq[31]['q']['Q'] = np.zeros((2,), dtype=object) # Hessians
stages.ineq[31]['q']['Q'][0] = np.array([1.0 0],[0 2.0])
stages.ineq[31]['q']['Q'][1] = np.array([5])
stages.ineq[31]['q']['l'] = np.zeros((2,), dtype=object) # linear terms
stages.ineq[31]['q']['l'][0] = np.array([0], [1])
stages.ineq[31]['q']['l'][1] = np.array([0])
stages.ineq[31]['q']['r'] = np.array([3],[1]) # RHSs
8.9. Binary constraints¶
To declare binary variables, you can use the bidx field of the stages struct or object. For example, the following code declares variables 3 and 7 of stage 1 to be binary:
stages(1).bidx = [3 7]
stages.bidx[0] = np.array([3, 7])
That’s it! You can now generate a solver that will take into account the binary constraints on these variables. If binary variables are declared, FORCESPRO will add a branchandbound procedure to the standard convex solver it generates.
8.10. Declaring Solver Outputs¶
FORCESPRO gives you full control over the part of the solution that should be outputted by the solver. It is also possible to obtain the Lagrange multipliers of certain constraints. To define a standard output as a slice of the primal solution vector, use the function
output = newOutput(name, maps2stage, idxWithinStage)
stages.newOutput(name, maps2stage, idxWithinStage)
where name
is the name you give to the output (you will need this to read it after calling the solver). The index vector (or integer) maps2stage
defines
to which stage this output maps to. The last argument, idxWithinStage
allows the user to select which indices from the stage vector should be outputted by the
solver.
To define an output as a slice of certain Lagrange multipliers, use the function
output = newOutput(name, maps2stage, idxWithinStage, maps2const)
stages.newOutput(name, maps2stage, idxWithinStage, maps2const)
where the remaining argument maps2const
specifies the constraint associated with the Lagrange multipliers being requested.
maps2const 
Constraint 


Equalities 

Upper bounds 

Lower bounds 

Polytopic bounds 
8.10.1. Example¶
To define an output to be the first two elements of the primal solution vector, use the following command:
output1 = newOutput('u0', 1, 1:2)
stages.newOutput('u0', 1, range(1,3))
To define an output to be the first and third indices of the Lagrange multipliers for the equality constraints of the second stage, use the following command:
output2 = newOutput('dual_eq0', 2, [1 3], 'r')
stages.newOutput('dual_eq0', 2, [1,3], 'r')
8.11. Generating the solver¶
After the optimization problem has been formulated into a structure stages, an optimized solver can be generated. To do so, the solver requires a name and a number of solver options, as described in Section 15.
codeoptions = getOptions('solver name');
generateCode(stages, params, codeoptions, outputs);
options = forcespro.CodeOptions('solver_name')
stages.codeoptions = options
stages.generateCode('user_id')
8.12. Calling the generated lowlevel solver¶
After solver generation has completed, the solver itself (as a compiled library) as well as several interfacing files will become available in your working directory. These files are named according to what you named your solver; in the following we assume “SOLVER_NAME”. Calling the solver from MATLAB or Python is then as simple as:
problem = {} % a struct of solver parameters
SOLVER_NAME(problem)
import SOLVER_NAME_py # notice the _py suffix
problem = {} # a dictionary of solver parameters
SOLVER_NAME_py.SOLVER_NAME_solve(problem)
Note
Don’t give your solver the same name as the script you are calling it from. Doing so will overwrite your calling script with the solver interface. For example, in a script named test_problem.m, choose a name such as test_solver instead of test_problem.
Note
The highlevel Python interface provides more convenient access to solvers generated using the highlevel interface. This method of calling a solver is only available for solvers generated through the lowlevel interface, and highlevel solvers can only be called from Python through the means described in the highlevel interface documentation.